Differences Between Servo Drives and InvertersSep 08,2022The technology of AC servo itself draws on and applies the technology of frequency conversion. On the basis of the servo control of the DC motor, it is realized by imitating the control method of the ...
Application and Installation of Servo Motor ControllerAug 05,2022The servo motor controller is a key device in the numerical control system and other related mechanical control fields. Generally, the servo motor is controlled by three methods of position, speed and...
What Are the Faults of the AC Servo Motor That Need to Be Repaired?Jul 08,20221. The phenomenon of AC servo motor maintenanceWhen the AC servo motor is feeding, the movement phenomenon occurs, and the speed measurement signal is unstable, such as the encoder has cracks; the con...
Repair of AC Servo Motor Commutator and EncoderJul 01,2022Ⅰ. Repair of AC servo motor commutator1. The surface of the commutator is obviously uneven (can be touched by hand) or the spark when the motor is running is as in the fourth case. At this time, it i...
Common Servo Motor Troubleshooting and MaintenanceJun 08,2022Ⅰ. What are the tasks to be done before starting the AC servo motor?1. Measure the insulation resistance (not less than 0.5m for low-voltage motors).2. Measure the power supply voltage, check whether...
The Difference Between Stepper Motor and Servo MotorJun 01,2022The rotor inside the servo motor is a permanent magnet. The U/V/W three-phase electricity controlled by the driver forms an electromagnetic field. The rotor rotates under the action of this magnetic f...
Different Definitions of Servo Drives and Frequency ConvertersMay 17,20221. The role of AB servo drive and inverterThe servo driver is used to drive the servo motor. The servo motor can be a stepper motor or an AC asynchronous motor. It is mainly used to achieve fast and a...
Causes of Overcurrent on the Servo Drive DisplayMay 03,2022Ⅰ. Overcurrent during the work of AB servo driveThat is, the motor drive system has overcurrent during the working process, and the reasons are roughly as follows:1. The motor transmission mechanism ...
EN
Call us on: 
Email Us: 
1103, Block C, South Building, Luo Fang Road, Luohu District, Shenzhen, 518001, China 
